Veteran-Owned Small Business · CMMC Level 2 · Dayton, Ohio

Drawing board
to first flight.

Keelstone Aerospace is an uncrewed-systems engineering firm. We design airframes, integrate avionics and autonomy, and run the flight test campaigns that turn prototypes into fielded aircraft, for prime contractors, AFRL and the services.

Flight hours supported1,400+Across Group 2–4 uncrewed aircraft since 2021
Cyber postureCMMC Level 2Certified · CUI-ready engineering environment
Current programVigil-7 · Group 3 UASFlight test and airframe subcontract to Meridian Defense Systems
Working with
Meridian Defense SystemsAFRLU.S. Air ForceOhio Department of TransportationThree university labsCMMC Level 2AS9100
Vehicle explorer

Where we work on the aircraft

Select a zone on the airframe to see what Keelstone designs, integrates and tests there. We cover the whole vehicle, not one subsystem.

NOSE / SENSOR BAY WING / STRUCTURE AVIONICS BAY PROPULSION BAY TAIL / CONTROLS GROUP 3 UAS · PLANFORM · ILLUSTRATIVE
Zone

Nose & sensor bay

    Program in execution
    Vigil-7Group 3 UAS · ISR / Comms Relay
    Prime
    Meridian Defense Systems
    Role
    Airframe structures and flight test lead, subcontract
    Status
    Envelope expansion complete; 212 sorties flown without a mishap
    What it signals

    A small firm trusted to sign the test cards on a prime's aircraft.

    On Vigil-7, Keelstone wrote the structural substantiation, built the HIL bench, and ran a 14-month flight test campaign from first hover to the full operational envelope. The prime kept its engineers on the next design while we proved this one.

    Why Keelstone

    Engineers who have signed for an aircraft.

    Program offices bring us in when a schedule has a flight test on it and nobody on the team has run one. We arrive with the process, the paperwork and the scars.

    01

    Flight-test pedigree

    Founder Dana Whitaker was a Navy flight test engineer and later chief engineer for an uncrewed program at Meridian Defense Systems. Every test card we write is reviewed by someone who has stood on the ramp.

    02

    Contract-ready today

    CMMC Level 2 certified, AS9100 registered, SAM-registered with UEI and CAGE, and SBA-verified Veteran-Owned. Set-aside eligible and cleared to handle Controlled Unclassified Information.

    03

    Bench to range, in-house

    Our own hardware-in-the-loop bench, composite layup room, 50 kN static test frame and a standing FAA COA at a 1,200-acre range 40 minutes from the office.

    04

    Next door to the customer

    Headquartered in Dayton, Ohio, minutes from Wright-Patterson Air Force Base and the Air Force Research Laboratory, with the Springfield-Beckley UAS test corridor up the road.

    Certified · Registered · Member

    Vetted by the people who check

    SBA-verified veteran ownership, CMMC Level 2 cybersecurity certification, AS9100 quality registration and membership in the Dayton Area Chamber of Commerce.

    VOSBVeteran-Owned
    Small Business
    CMMCLevel 2
    Certified
    AS9100Quality
    Registered
    DACCDayton Area
    Chamber Member
    Founder portrait
    image slot
    Leadership

    Dana Whitaker

    Founder & Principal Engineer

    Dana spent six years as a U.S. Navy flight test engineer at Patuxent River, then eight at Meridian Defense Systems, finishing as chief engineer on a Group 3 uncrewed aircraft that went from clean sheet to deployment in 31 months. Keelstone was founded in 2021 to give smaller programs the same disciplined path to first flight. Dana holds a B.S. in Aerospace Engineering from Purdue University and an M.S. in Flight Test Engineering from the U.S. Naval Test Pilot School.

    U.S. Navy VeteranUSNTPS GraduateEx-Chief Engineer, MeridianB.S. Aero, Purdue
    Latest

    Programs & news

    Have a first flight on the calendar?

    Tell us the aircraft, the milestone and the date. We'll come back with a scoped test and integration plan within two business days.

    Start a conversation
    Home / Capabilities / Flight Test Engineering

    Flight Test Engineering

    A flight test campaign is a sequence of small, deliberate risks. Keelstone plans them, instruments them, flies them and closes them out, so the aircraft reaches its envelope on schedule and comes home every time.

    Aircraft classes
    Group 2 – 4 UAS
    Fixed-wing, VTOL and hybrid, 25 lb to 1,320 lb
    Range access
    Standing FAA COA
    1,200-acre private range plus the Springfield-Beckley corridor
    Record
    1,400+ hours · 0 mishaps
    Across six programs since 2021

    Planning & safety

    • Test plans and test cards with build-up logic and knock-it-off criteria
    • Safety-of-flight review and hazard analysis to MIL-STD-882
    • Airworthiness substantiation packages for military and FAA authorities
    • Range coordination, COA management and frequency deconfliction

    Execution & data

    • Instrumentation design: strain, pressure, temperature, inertial and video
    • Envelope expansion: hover, forward flight, loads, flutter clearance
    • Real-time monitoring with go/no-go displays in the ground station
    • Data reduction and model correlation delivered within 48 hours of each sortie
    How a campaign runs

    Four phases, one owner

    Every campaign moves through the same phases. Each closes with a deliverable the program office signs.

    PHASE 1

    Readiness

    Requirements review, test plan, hazard analysis, instrumentation and ground-test completion. Ends with a flight readiness review.

    PHASE 2

    First flight

    Hover or taxi tests, first takeoff, basic handling and return-to-base checks within a tight, pre-briefed box.

    PHASE 3

    Envelope expansion

    Build-up points in airspeed, altitude, weight, CG and loads, each cleared against predictions before the next.

    PHASE 4

    Close-out

    Final test report, updated performance and loads models, and a handover brief for the operational unit.

    From the range

    Selected campaigns

    Image slots for ramp, ground-station and in-flight photography.

    A first flight date is a promise. Let's keep it.

    Keelstone plans and runs flight test for primes, labs and startups.

    Plan a campaign
    Home / Capabilities / Airframe & Structures

    Airframe & Structures

    Light enough to fly the mission, strong enough to survive the test matrix. We design composite and metallic airframes, prove them with analysis, and break them on our own test frame before the customer ever sees a crack.

    Materials
    Carbon · Glass · Al · Ti
    Prepreg and wet layup, bonded and fastened assemblies
    Analysis
    Linear & nonlinear FEA
    Static, buckling, modal, fatigue and damage tolerance
    Test
    50 kN static frame
    In-house static, fatigue and environmental test

    Design & analysis

    • Airframe architecture: wing box, fuselage, empennage, landing gear interfaces
    • Composite laminate design and ply-level optimization
    • Loads development from flight mechanics and gust models
    • Finite element analysis with margins of safety reported per element group
    • Flutter and aeroelastic screening

    Build & test

    • Prototype fabrication in our composite layup room
    • Static test to limit and ultimate load with full strain survey
    • Fatigue and environmental test: thermal cycling, humidity, vibration
    • Structural substantiation report ready for an airworthiness authority
    Gallery

    Shop and test frame

    Image slots for layup, FEA contour and static-test photography.

    Send us the loads.

    We'll return a structural concept, a mass estimate and a test plan.

    Scope a structure
    Home / Capabilities / Avionics & Autonomy Integration

    Avionics & Autonomy Integration

    The aircraft is only as good as the box that flies it. We select flight computers, integrate sensors and datalinks, tune the autopilot, and prove the whole stack on a hardware-in-the-loop bench before it ever leaves the ground.

    Architecture
    MOSA-aligned
    Open interfaces so the customer owns the stack
    Verification
    Hardware-in-the-loop
    Full flight software on real hardware against a 6-DOF model
    Datalinks
    LOS & BLOS
    C-band, L-band, SATCOM relay; encrypted C2

    Integration

    • Flight computer and autopilot selection and configuration
    • Sensor suite: GNSS/INS, air data, radar altimeter, EO/IR payloads
    • Datalink and C2 integration with ground control stations
    • Power and harness design with EMI/EMC pre-compliance

    Verification

    • 6-DOF simulation and autopilot gain tuning
    • Hardware-in-the-loop fault injection: link loss, GNSS denial, actuator failure
    • Lost-link and contingency logic testing against the airworthiness case
    • Software configuration control and flight-release documentation
    Gallery

    Bench and ground station

    Image slots for HIL bench, harness and GCS photography.

    Fly it on the bench first.

    We'll scope a HIL and integration plan around your airframe and payload.

    Discuss integration
    Home / Capabilities / Thermal Protection & Survivability

    Thermal Protection & Survivability

    Above Mach 3 the air itself becomes the enemy. Keelstone performs aerothermal analysis, selects hot-structure and thermal-protection materials, and shapes external surfaces so a vehicle survives both the heat and the threat.

    Regime
    Mach 2 – 6
    Supersonic cruise through hypersonic glide and boost
    Materials
    C/C · UHTC · Ti · Ablatives
    Selection, test coupon programs, supplier qualification
    Deliverable
    Thermal budget
    Wall temperature, heat flux and TPS mass by zone and trajectory

    Aerothermal analysis

    • Trajectory-based heating: stagnation, leading edge, acreage
    • Transient thermal models of hot structures and TPS stacks
    • Thermal-structural coupling and thermal stress margins
    • Sensor and antenna window thermal design

    Survivability

    • Signature-aware shaping of external mold lines and inlets
    • Material and coating trades balancing heat, weight and signature
    • Coupon and arc-jet test planning with partner facilities
    • Survivability assessments for contested-airspace missions
    Interactive

    What the leading edge sees

    Drag the Mach number. Watch stagnation temperature and dynamic pressure climb, and the material class the leading edge needs. Values are illustrative for 11 km altitude, not design data.

    Mach
    0.8
    Stagnation temp
    245 K
    Dynamic pressure
    11 kPa
    Leading-edge class
    Aluminum

    Simple isentropic model at 11 km: T₀ = T(1 + 0.2M²), q = ½ρV². Real design uses trajectory heating, wall catalysis and material limits.

    Gallery

    Hot structures and coupons

    Image slots for thermal contour, coupon and arc-jet photography.

    Designing for Mach 4 and up?

    Keelstone can build the thermal budget and the material plan to match.

    Talk to us about high-speed
    Home / About

    Founded by a flight test engineer. Run like a test program.

    Keelstone Aerospace LLC is a Veteran-Owned Small Business headquartered in Dayton, Ohio. Our mission is to get uncrewed aircraft from the drawing board to a safe, documented first flight faster than the programs that build them expect.

    Founder portrait
    image slot
    Founder & Principal Engineer

    Dana Whitaker

    Dana is the Founder and Principal Engineer of Keelstone Aerospace. A graduate of the U.S. Naval Test Pilot School, Dana spent six years as a Navy flight test engineer at Naval Air Station Patuxent River, then eight years at Meridian Defense Systems, where a clean-sheet Group 3 uncrewed aircraft went from concept to deployment in 31 months under Dana's leadership as chief engineer.

    Keelstone was founded in 2021 on a simple observation: most small UAS programs have good designers and no one who has run a flight test. The company exists to be that person for every program that needs one.

    U.S. Navy VeteranUSNTPS Class 148Chief Engineer, Meridian Defense SystemsB.S. Aerospace Eng., PurdueM.S. Flight Test Eng.
    Credentials

    Contract-ready

    Everything a contracting officer or supplier-diversity team needs, in one place. Copy any identifier with a tap.

    UEIKS7Q2M4XN8R1
    CAGE8KL2T
    DUNS08-421-9937
    EntityKeelstone Aerospace LLC
    Emailinfo@keelstone-aero.com
    Business status
    SBA-Verified Veteran-Owned Small Business
    Eligible for VOSB set-asides and sole-source awards under applicable thresholds
    Cybersecurity & quality
    CMMC Level 2 · AS9100 Rev D
    Authorized to process Controlled Unclassified Information; AS9100-registered design and test processes
    NAICS
    541330 · 541715 · 336411
    Engineering services; physical sciences R&D; aircraft manufacturing
    Location

    In the Miami Valley, next to the mission

    Dayton sits beside Wright-Patterson Air Force Base, home of the Air Force Research Laboratory and Air Force Life Cycle Management Center, with the Springfield-Beckley UAS test corridor twenty minutes away.

    Headquarters
    2210 Research Park Dr, Ste 140
    Dayton, OH 45431
    Facilities
    HIL bench · Layup room · 50 kN frame
    6,800 sq ft of lab, shop and office
    Range
    Standing FAA COA
    1,200-acre private range, 40 minutes from the office

    Let's talk about your aircraft.

    Briefings for primes, program offices and supplier-diversity teams.

    Start a conversation
    Home / Programs & News

    Programs & News

    Contract awards, milestones and the events where you'll find us.

    Press and partnership inquiries

    Reach the team at info@keelstone-aero.com or through the contact form.

    Contact
    Home / Contact

    Start a conversation

    Tell us about the aircraft, the milestone and the date. We typically respond within two business days.

    Do not include classified or export-controlled information in this form. For CUI, request a secure channel.