// Panel upgrades · EV charging · Whole-home electrical
Your panel was built for 1994.
Your house isn't.
An EV charger, a heat pump, an induction range, and the hot tub you keep talking about all want the same 100 amps your house has had since the Clinton administration. We size the panel for the house you're going to have, install it to code, and hand you a labeled schedule so the next electrician never has to guess.

- 274 reviews
- 4.9
- · 274 reviews
- panels since 2016
- 620+
- · panels since 2016
- permitted and inspected
- 100%
- · permitted and inspected
Rough estimate. Tap what you have or want. We confirm with a real NEC 220 calc on site.
Over. A panel upgrade comes first.
This is past what the service can safely carry. A 200-amp upgrade solves it for the next twenty years, and the federal credit covers part of it.
Simplified estimate, not a permit calc. Final sizing follows NEC Article 220.
200A panel upgradesLevel 2 EV chargersHeat pump circuitsGeneratorsRewiringLighting

// Panel upgrades
Sized for the house you'll have in ten years.
A 200-amp service with room to grow is the single best electrical investment a Maryland home can make right now. We handle the utility coordination, the permit, the inspection, and the part most people skip: every breaker labeled, torqued to spec, and photographed before the cover goes on.
- 100A to 200A upgrade, overhead service
- $3,200 – $4,600
- Underground service, add
- $900 – $1,800
- Smart panel with per-circuit monitoring
- From $6,800
- Federal 25C tax credit on qualifying upgrades
- Up to $600
// EV charging
Wake up to a full battery. Every day.
A Level 2 charger on a dedicated 50-amp circuit adds 30 to 40 miles of range an hour. We install any brand, pull the permit, and if your panel can't take the load, we'll tell you before you buy the charger, not after.

// Everything else
If it has a breaker, we work on it.
Flat-rate pricing on the common jobs. Everything permitted where the county requires it, which is more often than most electricians admit.
// How we close a job
Nobody should have to guess what breaker 14 does.
Every job, big or small, ends with the same four things in your inbox. It's a habit from the shipyard, where an unlabeled circuit was a safety incident, not an inconvenience.
- 01A printed, labeled panel scheduleTaped inside the door. A PDF copy in your email.
- 02Photos of the work before it's coveredBoxes, splices, and torque marks. Useful for the next owner and the next inspector.
- 03The permit and the passed inspectionScanned, attached, done. Not "we'll mail it."
- 04A five-year workmanship warranty, in writingIf something we installed fails, we fix it. No "wear and tear" clause.

// From the owner
“I spent nine years wiring boats and shipyard equipment, where salt, vibration, and a wrong gauge wire can put someone in the water. Residential work is easier on paper. I just never saw a reason to do it to a lower standard.”
Annapolis, on the record.
★★★★★Had two quotes for a 200A upgrade. Marcus was the only one who asked what we planned to add in the next five years. Panel went in on a Tuesday, inspector signed off Thursday, and the labeled schedule is a thing of beauty.
★★★★★Told me my panel could not safely take the charger I'd already bought. Could have just installed it. Instead he showed me the math, we did the upgrade, and he filed the state rebate for us.
★★★★★Our 1920s house had knob-and-tube in half the walls. They rewired it over four days with maybe six small patches total. The insurance company accepted their letter without a single follow-up question.
// Service area
Anne Arundel County, both sides of the Severn.
Shop on West Street in Annapolis. Two crews, one dedicated to panels and EV, one to everything else.
- Annapolis
- Eastport
- Severna Park
- Arnold
- Crownsville
- Edgewater
- Davidsonville
- Pasadena
- Crofton
- Cape St. Claire